ИБП APC BR1500G-RS (BR1500G-RS)

Main features
- Operating time with a load of 865 W: 3m 39s
- Output power: 865 Watts / 1.5 kVA
- Output connectors:
(3) Schuko CEE 7 (Surge protection)
(3) Schuko CEE 7 (Battery backup)
- Rated output voltage: 230V
- Rated input voltage: 230V
- Input connection type: Schuko CEE 7/7P
- Length of the cord: 1.5 meters
- Maximum input current: 7.0A

Exit
- Maximum output power: 865 Watts / 1500 VA
- Maximum preset power value: 865 Watts / 1500 VA
- Rated output voltage: 230V
- Output connections: (2) IEC 320 C13 (Surge protection); (6) IEC 320 C13 (Battery backup)

Entrance
- Rated input voltage: 230V
- Input frequency: 47-63 Hz
- Input connection type: IEC-320 C14
- Input voltage range when operating from the mains: 175-295V
- Input voltage adjustment range when operating from the mains: 160-286V

Batteries and battery life
- Battery type: Maintenance-free sealed lead-acid battery with thickened electrolyte: leak protection
- Pre-installed batteries:1
-Typical recharge time: 8 hours
- Replacement battery pack: RBC33
- The number of replaceable sets of batteries:1

Communication and administrative tools
- Interface port: USB
- Control panel. LED display with scales of load and battery charge, as well as indicators On Line (mains operation): On Battery (battery operation): Replace Battery (need to replace the battery): and Overload (overload) = Indicator of the modes On Line (mains operation): On Battery (battery operation): Replace Battery (need to replace the battery): and Overload (overload).
- Beep sound. The signal of switching to battery operation mode : a special signal of battery exhaustion : the possibility of setting delays
Surge protection and noise filtering.
- Rating by the level of absorbed burst energy: 180 Joules
- Filtering.Permanent multi-pole noise filter: 0.5% residual voltage amplitude according to IEEE standards : voltage surge limitation without time delay: compliance with UL 1449 requirements
- Protection of data transmission lines.Fax modem / DSL modem protection on the side of the telephone line with an RJ-11 socket (for one two-wire line), Protection on the 10/100 Base-T Ethernet line with an RJ45 socket